| Main > Main Forum |
| Console control organization with cab? |
| (1/1) |
| Dazz:
Hey guys, I personally love emulation and have many consoles setup on my cabinet even though I have the real consoles sitting in a closet. Right now I have the following console controllers hooked up to my cabinet: 2 x NES 2 x SNES 2 x Sega Genesis 2 x Sony PSX 2 x Sega Dreamcast 2 x N64 All are hooked up via USB and USB Powered hubs using various adapters. I was wondering how you would suggest organizing/storing controllers. The controllers really need to be connected at all times as when they are disconnected/re-connected windows assigns different ID's to them. Because of this I'd have to re-configre the controls each time I want to play. How would you suggest organizing/storing external controls like this? |
| severdhed:
well, if you want them connected to your cabinet at all times, you really have two options: 1: store them inside the cabinet, accessible via a door of some kind (coin door perhaps) 2: mount hangers of some type to the sides of the cabinet to hang them on. you could perhaps drill 2 columns of holes down the side and use various peg-board hangers to hold the various controllers. |
| ulao:
Here is something I made for a friend.. Basically its in all in one adapter for just about every controller you could want. Switchable up front. He mounted it in his arcade cab but I have yet to get the pics. |
| Navigation |
| Message Index |