| Main > Main Forum |
| U360 Question/ Help Please |
| << < (3/5) > >> |
| Visitor Q:
I just have no clue as to why if I set it to ID 2 it does not register in windows or the map program anymore as a U360. I guess I will have to contact Ultimarc but in the meantime I just have one set to ID 1 and the other to ID 3. :dunno |
| Ginsu Victim:
In the UltraMap settings, do you have it set to look for joystick 1 and 2? By default, it's set to 1 and 3. |
| Visitor Q:
Yes I do but even so listen to what I am saying... If I take either one of my two U360s and change the ID to #2, go to control panel in windows and look at my game controllers no longer will my U360 be called "Ultimarc Ultra Stick Player 1" it will be called "2 axis 8 button joysticks". If I change the ID to 3 it will now be called "Ultimarc Ultra Stick Player 3". In other words whenever I have either one of my U360s sat to ID #2 it does not show up correctly in the window's game controller panel and in return I do not get a centering point in the Ultra Map program that allows me to adjust the controller even though the program see's it is there. See Attached Pix. Notice the first picture... Centering point in map program for both stick 1 and 3, correct names in game controller panel. Then in the second picture, you can see that the program see's stick #2 but there is no centering point and you can also see the incorrect name in windows. |
| Ginsu Victim:
check your PM |
| AndyWarne:
The problem might be a Windows issue. You could try setting to ID 2, then in Control panel, System, Device Manager, open the USB Controller entry and right click and Uninstall the composite devices there. Then unplug and reconnect. Andy |
| Navigation |
| Message Index |
| Next page |
| Previous page |