| Arcade Collecting > Restorations & repair |
| Pac-man restoration - Return from Doh! |
| << < (9/64) > >> |
| WunderCade:
It looks like you have the proper Pac-man Power Block so you're golden. The wires you have clipped should wire up the same. |
| Spyridon:
Was able to score a NOS Pac-man marquee. :applaud: Much better shape than the one I picked up earlier. The paper covering is really on there good. Anyone know a good way to get it off? Can I wet it? It peels off okay, but in small pieces and will take forever to get it done. |
| Spyridon:
Also, was looking over my wire harness and noticed that a few wires had been clipped: Going to have to do some work and trace these back and see what they are for. |
| Level42:
The schematics should tell you the color code of the wires and where they're connected to. |
| Spyridon:
Traced the cut wires back and they are for the speaker. I would have guessed that was the case even before looking. That will be an easy fix. The third wire appears to be a ground wire. |
| Navigation |
| Message Index |
| Next page |
| Previous page |