| Arcade Collecting > Restorations & repair |
| Pac-man restoration - Return from Doh! |
| << < (29/64) > >> |
| SirPeale:
--- Quote from: Spyridon on July 20, 2009, 11:54:12 am ---I noticed this weekend that it looks like I have a few extra holes in my control panel. I'm guessing the outer two holes are correct and the inner two need to be fixed? Can someone with a Pac-man confirm this? --- End quote --- The holes on the right are for the P1/P2 buttons. Pac Man has no other buttons. |
| WunderCade:
I think he is referring to the bottom portion. You're correct, the two smaller outer holes (on each side) are where wood screws secure the wood backing, those other two (inner most) do not belong. |
| orion:
--- Quote from: WunderCade on July 20, 2009, 09:14:51 pm ---I think he is referring to the bottom portion. You're correct, the two smaller outer holes (on each side) are where wood screws secure the wood backing, those other two (inner most) do not belong. --- End quote --- Those are the only two holes I see in his picture that do not belong, |
| SirPeale:
Oops...I didn't let the images load when I replied. Now it makes sense. |
| Spyridon:
--- Quote from: SirPeale on July 20, 2009, 07:09:12 pm --- The holes on the right are for the P1/P2 buttons. Pac Man has no other buttons. --- End quote --- Come on...you have to give me more credit than that! :laugh2: Yes, I was referring to the 4 holes on the bottom section of the panel. It looks like I will need to fill in the inner most holes as they don't belong. |
| Navigation |
| Message Index |
| Next page |
| Previous page |