Pac-man restoration - Return from Doh!

Arcade Collecting > Restorations & repair

<< < (27/64) > >>

SirPeale:
Looks like you need some leg levelers. I have them in my store.

Also, don't forget to remove that steel piece from the bottom and paint it.

Spyridon:

--- Quote from: SirPeale on July 06, 2009, 08:52:29 am ---Also, don't forget to remove that steel piece from the bottom and paint it.

--- End quote ---

Yep, I was planning on doing that.

King Nerd:
Looks in great shape. You've done great work so far. Keep it up!

I'm very envious. I have no projects right now. Lookin' for a Pac or DK/Jr.
Hopefully I'll be able to get a Pac and use your restore as a guide.

Thanks

Spyridon:
More work on the back door today (aren't vacation days great!).

First I pulled the vent screens off of the old broken back door

Next, I clamped the old door and new door together and used it as a template to cut new vent holes. The magic of the router made this a pretty easy task:

And the final product:

All that's left is to cut the hole for the lock, but I think I'll wait until after it's all painted.

*** door is upside down to make the comparison to the other holes easier. It will be turned the correct way for the final product.

Mimatt:
Are those stencils still obtainable?? I'm about to start work on my Paccy, that I've been putting off for 3 years, And really don't wanna have to use those god-awful stickers.

PM me if you can hook me up with a set. The only sideart I tend to run into has those obvious errors in the wooshing behind the letters.

I'm really stuck on the back door part, on mine. Mine broke into several pieces, and I don't have a template to work from, to make a new one.

I love that new monitor smell.

Do you have a better picture on how you spliced the new monitors power supply into the original, and where and how you grounded it? I found a new Happ, and I'd like to use the isolation transformer, instead of having to rig a power strip in the machine.

Thanks!

Navigation

 Message Index

Go to full version