Main > Main Forum
Switching Sanwa JLW between 4 and 8 way
(1/2) > >>
dprush83:
Whew, it's been a bigger project than i have accounted for--but I put my Sanwa JLW in for player 1 and was wondering how to switch between 4 and 8 way play.  I haven't found any guides online so I figured somebody may know where to look.  Thanks!
jban4us:
There's a clear plastic restrictor plate on the bottom, it has "gear teeth" on the outer rim. You just turn this to switch between them.
dprush83:
Do you have to release the screws first and the fasten them in place once it is rotated??
Jack Burton:
Yep, just loosen the screws and turn it till it gets to the other slot and then tighten back down again.
AndyWarne:
Our J-Stik is a Sanwa JLW.
All we do is fit nylon washers under the screw-heads and re-fit the screws with low-strength Locktite. This enables the restrictor to be turned against some resistance, without loosening the screws.
Its a mod you could do with a standard JLW.
Navigation
Message Index
Next page

Go to full version