Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: BACK TO THE ARCADE BARTOP  (Read 73456 times)

0 Members and 1 Guest are viewing this topic.

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-ARTWORK UPDATE
« Reply #80 on: February 26, 2009, 06:09:04 am »
Here is a new marquee i have made by myself.I am not good at that part of the project but i am trying.... :banghead:

plz say your opinion about the marquee and PLZ make suggestions for changes so it looks better.



here is the cp artwork.

« Last Edit: February 26, 2009, 06:22:17 am by dkssprs »

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #81 on: February 26, 2009, 07:33:35 am »
I like it!

Can you attach the image instead of adding it in through hosting, the marquee looks a bit grainy in the image.

The black/blue on the marquee should be changed to more of a grey style gradient to match the CP more.

Also, the clock bit on the left has had a section cut of at the bottom.

Lastly, the "E" in the "exit" on you CP is a different angle from the other "E's".

Apart from that you look ready to roll! :applaud:

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #82 on: February 26, 2009, 08:30:58 am »
Looks great.

I would try to finish the edge of the clock off where it been chopped if possible.

Great theme. Shame you are not using the Bub n Bob artwork though. Its too good not to use, I may may use it myself at some point if you dont mind dkssprs/thatitalian.

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #83 on: February 26, 2009, 10:15:25 am »
Only if you pay ONE MILLION DOLLARS! :P

I don't mind! Feel free to use it, and if you want any editing let me know!

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #84 on: February 26, 2009, 11:10:23 am »
Franco B ....feel free to use any of the artwork in this topic. Bubble bobble would be a great theme but i wanted something more neutral. BTTF is totaly my style.But you are right ....shame on me...bubble bobble is a legend.(i think the creator of BB died few months ago)

Now about the BTTF artwork
I am not capable to finish the clock......no skills for that :cry:

What grainy means..?And whats the difference between attach and hosting?

Thatitalian .....you are right.I have to match the cp bagkground with the marquees background

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #85 on: February 26, 2009, 12:57:03 pm »
Grainy means that the quality is not very good, it seems pixelated.

I think it is because you hosted through imageshack. Use the actual copy you have, reduce the size by 75% then attach it. That way I can tell more if the image is sharp.

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #86 on: March 02, 2009, 09:38:53 am »
At last.... :cheers:

The cab is red and now i can mount all the hardware parts.
I am so proud.
Take a look at the photo...which isnt that good.I will upload new and better photoes tomorrow.



 

abzman2000

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 217
  • Last login:August 26, 2020, 06:25:12 pm
  • I LIKE my hat!
Re: BTTF BARTOP-MARQUEE UPDATE
« Reply #87 on: March 02, 2009, 08:18:33 pm »
dude, this is one of the coolest concepts I have seen yet, right up there with the buckaroo bansai themed cab

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-AlMOST DONE !!!!!
« Reply #88 on: March 06, 2009, 10:35:42 am »
The cab is almost ready for Time travel.
The only things need to be done are printing the  artwork and do the wiring for the cp and the cab .


It's ALIVE :cheers:







javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7901
  • Last login:Today at 10:28:40 am
Re: BTTF BARTOP-ALMOST DONE !!!!!
« Reply #89 on: March 06, 2009, 10:44:57 am »
Wow - looking great!!  How is the viewing angle of the monitor?  It looks a little steep but I love the design...   :cheers:

In other news, last night I watched Back to the Future Part III.... for the millionth time.  It's not even that good of a movie but I still love it.
« Last Edit: March 06, 2009, 10:48:32 am by javeryh »

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-ALMOST DONE !!!!!
« Reply #90 on: March 06, 2009, 10:49:20 am »
The viewing angle is perfect if the cab is standing at a table like kitchen table.If you sit on a short chair and the cp is at your chest height then the view angle isnt that good.

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BTTF BARTOP-ALMOST DONE !!!!!
« Reply #91 on: March 06, 2009, 11:14:13 am »
Nice work! :applaud:

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-ALMOST DONE !!!!!
« Reply #92 on: March 09, 2009, 03:54:30 pm »
Today i have made a little progress.
I have mounted the lights for the marquee.The lights are for pc case modding and i find them very handy cause the heart of the cabinet is a pc so....they are compatible.
I have sticked the light on the usb speakers i use.The lenght of the speakers is exactly the same with the lenght of the lights.


Here is the back panel of the cab.I have on it a big fan 14cm to flow the hot air outside the cab.

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP- DONE !!!!!
« Reply #93 on: March 15, 2009, 04:51:47 pm »
I promise i will upload many many photoes of my completed project.Now i post only this cause i dont have my cam with me(this one is from my phone)

Thank you all for your great help the advices , solutions and your kind word.


I LOVE THIS CAB!!!


thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #94 on: March 16, 2009, 09:44:35 am »
NICE WORK BUD! :applaud:

I bet you love playing that thing! ;D

Make sure you post some more photos!!!

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #95 on: March 16, 2009, 10:01:37 am »










above the pushbutton for power-on the cab it is written "PUSH FOR TIME TRAVEL"

And above the psu "Danger 1.21 JIGAWATTS"


« Last Edit: March 16, 2009, 10:04:08 am by dkssprs »

Ralman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:May 08, 2013, 09:53:17 pm
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #96 on: March 16, 2009, 11:39:55 pm »
Impressive!  Nice work.

The labels were a great idea.

Blanka

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2248
  • Last login:January 25, 2018, 03:19:28 pm
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #97 on: March 17, 2009, 03:50:25 am »
What is BTTF?
*** Censored by NIVO *** ;D
Please can the board system be changed to allow the F word for Europe, Canada, Los Angeles/San Francisco/Seattle and Minnesota, and hide it for the rest of the USA and Australia? We have a totally different public opinion on it. Here it is a basic word like "AND".
« Last Edit: March 18, 2009, 03:11:28 am by Blanka »

Blanka

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2248
  • Last login:January 25, 2018, 03:19:28 pm
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #98 on: March 17, 2009, 03:51:06 am »
BLONDE  :dizzy:
Back To The Future.
Lameass! (myself)

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #99 on: March 17, 2009, 06:10:23 am »
It will never travel through time properly unless you make it out of stainless steel.

Luige11

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:December 16, 2009, 11:49:40 pm
Re: BTTF BARTOP- DONE !!!!!
« Reply #100 on: March 17, 2009, 07:19:08 pm »
I promise i will upload many many photoes of my completed project.Now i post only this cause i dont have my cam with me(this one is from my phone)

Thank you all for your great help the advices , solutions and your kind word.


I LOVE THIS CAB!!!



What kind of mame is this? Also this great good job :applaud:

system01

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 283
  • Last login:March 04, 2023, 08:06:55 pm
  • System Idle Processes are the Devil's Playthings
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #101 on: March 21, 2009, 12:06:37 am »
Good job and congratulations! :cheers:

dekar24k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 378
  • Last login:April 28, 2019, 03:50:11 pm
    • ArcadeForum.com
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #102 on: March 21, 2009, 10:22:22 am »
Excellent job and a great looking cab! I notice that you have placed the pushbuttons on the left side of the joysticks, so I assume you are left handed? Or do you prefer it that way?
Finished project: "The Saloon Arcade" - 2 player upright cabinet

Joystick.net - Retro gaming news and reviews

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #103 on: March 22, 2009, 06:09:45 am »
Thank you for your kind words and i wish you good luck for your project.
I have been asked this question lots of times.....but i will answers it again cause i know that it is very weird to many people in here.
In greece we are used to play the joys with the right hand and when we were about to play with a joy at the left side we cross our hands

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #104 on: March 22, 2009, 06:16:20 am »
Looks great, I'm very jealous!  :)

Bet its great fun to play!

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BTTF BARTOP-DONE 100% !!!!!
« Reply #105 on: March 22, 2009, 07:09:46 am »
All my friends when they saw it they said "NO WAY" I am very proud of my project ... i cant tell you exactly how i feel cause my english are bad.But i am sure everyone knows how i feel. I am very proud... :)
The best moments with the cab are when i spend time with my girl challengign eachother at Puzzle bubble and when friends come for a coffee and they say like "how about a Golden Axe" or "Double Dragon".
These moment give my cab a special price.

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #106 on: May 25, 2009, 08:34:03 am »
I really love the result, the "Back to the Arcade" theme looks fantastic. Cudos!
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

ratzz

  • Guest
  • Trade Count: (0)
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #107 on: May 25, 2009, 03:21:50 pm »
 :applaud:

Great paint job ... looks fantastic.

Well done buddy, a great cab and fantastic that you love it so much!  ;D

MaineEvent

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 243
  • Last login:September 10, 2015, 07:45:33 pm
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #108 on: May 25, 2009, 04:19:40 pm »
This control panel is the best! Where did you have it done?
What about the Flux-Capacitor or Mr. Fusion?

Very motivational piece! :applaud:
My Games:
Arkanoid

Kman-Sweden

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 526
  • Last login:October 23, 2015, 07:29:00 am
  • Up the Irons!
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #109 on: May 26, 2009, 03:46:38 am »
Sweet... :cheers:

Aceldamor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 878
  • Last login:October 25, 2019, 05:10:51 pm
  • You know you hear the music in your head...
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #110 on: June 10, 2009, 06:14:14 pm »
Now you need to do an intro animation of the flux capicitor for the windows loading screen...with an intro movie from the end of BTTF of Doc saying...."Roads, where we're going we don't need...roads", as the Delorian goes toward camera and flashes white straight to the game menus.

Very nice work on this cab..unique indeed.
Fuzzy Wuzzy was a woman!

Sosetsuken

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
  • Last login:November 10, 2014, 02:13:46 pm
  • Da Daaah Da Daaah Da, Da Da Daaah Da
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #111 on: June 11, 2009, 05:19:48 am »
Hey dkssprs,

heres an Intro video I did for my cab when I was gonna do it bttf style;

[youtube]dQsXkfYfJ30&fmt=18[/youtube]

Kman-Sweden

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 526
  • Last login:October 23, 2015, 07:29:00 am
  • Up the Irons!
Re: Bub & Bobs BARTOP!!!
« Reply #112 on: June 11, 2009, 06:25:26 am »
The Hardware Part

The monitor will be a LG FLATRON L1734S-BN 17''


CPU                 Pentium 4 3.2Ghz 478 socket
Motherboard   ASROCK P4I65GV
Ram                2GB
Harddisk         80GB
PSU                CHIEFTECH 450W


The controls part


1x Seimitsu PS-14-D-BK, blue:    2,00Euro
1x Seimitsu PS-14-D-BK, white:    2,00Euro
1x Seimitsu PS-14-D-BK, green:    2,00Euro
4x Sanwa OBSN-30, blue:    9,00Euro
4x Sanwa OBSN-30, white:    9,00Euro
1x 2P Start Button:    2,80Euro
1x 1P Start Button:    2,80Euro
2x Mag-Stik S, black:    39,00Euro
1x I-PAC ve:    35,95Euro


The frontend part

Maximus arcade http://www.maximusarcade.com/

Maybe I missed it but where did you get your controls parts? I'm asking because you payed in Euros and not Pounds or Dollars.. I'd like to find a store in Europe (that's not in GB) to buy stuff from.

thatitalian

  • Don't worry about the chicken, I feed my friends human all the time...
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 887
  • Last login:March 27, 2018, 10:52:37 am
  • The Revolution Is Coming...
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #113 on: June 11, 2009, 06:27:08 am »
AWESOME VIDEO!

DaOld Man

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5139
  • Last login:December 13, 2023, 12:03:14 am
  • Wheres my coffee?
    • Skenny's Outpost
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #114 on: June 11, 2009, 06:38:31 am »
Great job!

I love the concept..

 :applaud: :applaud: :applaud:

emphatic

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2008
  • Last login:Today at 09:41:25 am
  • -"Suck it, Donny!" -"No, YOU suck it.... more".
    • Emphatic's Video Game Collection
Re: Bub & Bobs BARTOP!!!
« Reply #115 on: June 11, 2009, 08:55:30 am »
Maybe I missed it but where did you get your controls parts? I'm asking because you payed in Euros and not Pounds or Dollars.. I'd like to find a store in Europe (that's not in GB) to buy stuff from.

Check out either www.arcadeshop.de (Lots of quality stuff) or www.arcadegames.se (cheap, but not bad stuff, great service). Also, do check out www.arkadtorget.se if you haven't already, great swedish community where we sell/trade/buy stuff as well.

Emph

Barry Barcrest

  • I'm only in it for the lack of money
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1620
  • Last login:November 09, 2021, 09:54:17 am
  • Simple Plan
    • E-Touch Jukebox
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #116 on: June 11, 2009, 10:14:06 am »
Nic cab, looks really nice.

dkssprs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:February 23, 2023, 01:32:26 pm
    • Bub & Bob's BARTOP
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #117 on: June 11, 2009, 12:25:47 pm »
Hey dkssprs,

heres an Intro video I did for my cab when I was gonna do it bttf style;

[youtube]dQsXkfYfJ30&fmt=18[/youtube]

Thank you very much mate  :notworthy: :notworthy: :notworthy: :notworthy:
Your video is very cool.... i love the BTTF sounds and that is simple and short......fits perfectly to my cab
Could you please give my a link to download it (like mediafire) cause if i download it from youtube a cant change the format to make it compatible with maximus arcade.
thank you again i will install it (when i have it) and i will upload a video of the cab ...(i must find first a vdeo camera  :hissy: )
 i have a question...why did you choosed the SEGA  present??? Wouldnt be better like BTTA(logo) presents??just a thought.....

Sosetsuken

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 133
  • Last login:November 10, 2014, 02:13:46 pm
  • Da Daaah Da Daaah Da, Da Da Daaah Da
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #118 on: June 11, 2009, 01:35:47 pm »
Yeah, it was gonna be on my Astro City Cab.  I can change the Sega Presents to something else you want! :D

What format would u like it in? (for maximus arcade)

Gatsu

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 943
  • Last login:November 04, 2017, 08:23:43 am
  • I'm not prejudice. I hate everyone equally.
Re: BACK TO THE ARCADE BARTOP-COMPLETED!!!!!
« Reply #119 on: June 11, 2009, 01:44:14 pm »
thats a pretty cool video.

I need something awesome for my cab intro as well....