Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How to use dip switches on Killer Instinct 1 *actual cabinet*  (Read 2762 times)

0 Members and 1 Guest are viewing this topic.

MyCatSucks

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:September 25, 2023, 03:57:15 pm
How to use dip switches on Killer Instinct 1 *actual cabinet*
« on: December 10, 2008, 04:09:30 pm »
I am hoping someone can help me with the dip switches on my recent acquisition, Killer Instinct. I have the Manual and it shows the different dip switch settings but does not explain how to change them. I have not been able to find any FAQ on how to adjust dip switches either. The manual also explains that to turn some dip switches on, they must be set to "off".

Do I have to actually change switches on the PCB inside the cabinet? I could not find a way to change them in the Settings menus.
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: How to use dip switches on Killer Instinct 1 *actual cabinet*
« Reply #1 on: December 10, 2008, 04:13:44 pm »
Yes, you change switches on the PCB in the cabinet itself.
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:April 09, 2024, 07:27:18 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: How to use dip switches on Killer Instinct 1 *actual cabinet*
« Reply #2 on: December 11, 2008, 07:51:14 am »
see this picture of my burnt out KI2?




the dip switches are in the 2 red plastic areas to left, same spot on a KI1 I believe (Im at work and my broken KI1 board is at home)


Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.
Pages: [1]
  
Go Up
« previous next »