Main > Main Forum

How does one mount a trackball in a cocktail?

Pages: (1/1)

squid3660:

Hi all... I am finally getting around to putting my cocktail together which I ordered from Arcade Depot.  Mostly everything is coming together fine, but I did run into one snag... the end to end control panels (11") were custom made to fit a 2-1/4" trackball.  I ordered the trackballs from Ultimarc.  Now my dilemma is that I have no clue as to how to mount the trackballs in the CP.  There was not enough room for a mounting plate, so I had Arcade Depot drill the holes into the CP to match the holes of the trackball.  And of course, my luck, the trackballs I ordered did not come with any mounting hardware.

Do anyone know what hardware would be best to mount these Ultimarc trackballs in the CPs?

Thanks!   

severdhed:

i've always used carriage bolts to hold my trackballs in.

squid3660:

Thanks for the reply...

What kind of trackball do you have in your cab?  What size bolts did you use?

Thanks!

severdhed:

i have a 3" wico trackball that i got from an old golden tee cabinet that i modified.  it already had bolts in it when i got it...i can measure them tomorrow...it's a little late now.  depending on the thickness of the panel, these may work:

http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=74&products_id=297




squid3660:

You rock!! These carriage bolts are ordered!  THANK YOU THANK YOU!

Pages: (1/1)

Go to full version