Arcade Collecting > Restorations & repair
Centipede Restoration
Spyridon:
--- Quote from: Wade on August 18, 2009, 07:58:50 pm ---Do you have the CP overlay yet? I'm wondering if the blue color is right. In the arcadeshop picture, it looks like dark blue. Do you have a repro to compare with the original color yet? I probably won't order it immediately but I want to be sure about the color.
Thanks,
Wade
--- End quote ---
Wade,
I got mine from Quarter Arcade and while I don't remember if I matched it up directly with the old one I think it was pretty close. Depending on the angle you looked at, the color changed.
Wade:
Does it look more like dark blue, or more like regular blue? Just take a good look at it next time you are looking at it and let me know what you think. No rush at all. The picture Quarterarcade has also looks darker.
Thanks,
Wade
Level42:
It's pretty simple:
US built => dark blue (get AS or QA, those are silk-screened AFAIK)
Irish built => bright blue, only available from Mamemarquees as inkjet repro. I wonder if he already corrected the little color differences I found.
More here:
http://forum.arcadecontrols.com/index.php?topic=63654.msg757723#msg757723
sevenleaf:
Looking smart dude! How did you clean between the brass coil things on the back of the neck?
Also, beware of removing the aquadag on the back. Read this thread for more tinfo http://www.jammaplus.co.uk/forum/forum_posts.asp?TID=10838&PN=1&TPN=1
Spyridon:
--- Quote from: sevenleaf on August 19, 2009, 08:25:54 am ---Looking smart dude! How did you clean between the brass coil things on the back of the neck?
--- End quote ---
Just spray with the degreaser and then hose down. It comes clean easily
--- Quote ---Also, beware of removing the aquadag on the back. Read this thread for more tinfo http://www.jammaplus.co.uk/forum/forum_posts.asp?TID=10838&PN=1&TPN=1
--- End quote ---
I don't have permission to view your link, but I did test the aquadag to make sure it didn't wipe off before I did the whole monitor.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version