| Main > Main Forum |
| VFM2-L1 Bill Acceptor Wiring |
| (1/1) |
| gancos:
This is a VFM2-L1 bill acceptor. I've searched and searched for how to wire this up and couldn't figure it out. I was hoping I could get some help here. I've got one plastic connector with 3 wires (black, white, green), and a second connector with 2 wires (black and red). and then a third green wire which I believe to link back to the first connector (also green). If I had to guess, I would say that the 2-wire connector (black, red) would hook up to the circuit board that adapts my buttons to the computer. The other connector.... White = Positive? Black = Negative? Green = Ground? That sounds right, but I'm no electrician. Also, are these running 12v? Thanks for your time gancos |
| Ken Layton:
Here's the VFM series manual: http://arcarc.xmission.com/PDF_Coin_Mechs_Etc/Mars/Mars_VFM1_and_VFM3_Series_Bill_Acceptors_Operation_and_Service_Guide.pdf Wiring and connector pinouts are on the last two pages. |
| Navigation |
| Message Index |