Main > Main Forum
Help me identify this 8-way trigger joystick...
(1/2) > >>
arzoo:
Does anyone recognize what game this 8-way trigger joystick was used for? I purchased it as NOS - it uses leaf switches. I'd like replace the handle with Randy's new Tron replacement handle - but I'm concerned the mounting screws won't work. The original Tron stick (and Randy's) has two screws holding the shell together through the shaft. My stick has a single screw through the shaft and appears to have two additional vertical screws at the bottom. I guess I could disassemble the stick, but I'd rather just find an exploded view - any idea's?
leapinlew:
Looks like a Mach 3 stick to me



Ummon:
Yeah, same one I have. I only see the two screws underneath the bottom of the handle. Except for the mounting holes, the overall design is the same as the Tron/GGG/Happ handles. Maybe ask Randy if this will matter?
arzoo:

--- Quote from: Ummon on November 16, 2008, 09:45:38 pm ---Yeah, same one I have. I only see the two screws underneath the bottom of the handle. Except for the mounting holes, the overall design is the same as the Tron/GGG/Happ handles. Maybe ask Randy if this will matter?

--- End quote ---

Ummon,
I sent Randy an email, but he really needs a picture of our handle disassembled. For me to do that would be a royal pain in the *ss - I'll have to remove my panel, and undo all the wires to get the stick separated from the base. Any chance you could provide a picture?
Ummon:
The thing is snapped together pretty tight. Have to be careful pulling it apart as the trigger and spring like to pop out.
Navigation
Message Index
Next page

Go to full version