Main > Main Forum
New GGG Product: Tron Joystick Handle - was: Soooo.....what's this thing worth?
Visitor Q:
Well this shell fit inplace of the one here on this stick?
http://www.happcontrols.com/joysticks/joysticks_amusement.htm
Not sure I understand the "mounting hole spacing" comment.
Xiaou2:
VisitorQ,
It will fit on:
http://www.happcontrols.com/joysticks/50997000.htm
but not
http://www.happcontrols.com/joysticks/95017200.htm
There are two holes in the handles, and two holes on the joystick shaft.
The holes have to align so that you can screw the handle to the shaft.
The analog joystick shafts have their 2 holes drilled in different places...
so the Tron handles will not be able to screw onto the analog
shaft unless you drill and 'tap' a new hole in the joystick shaft.
I think most people are using digital sticks, or the original tron stick,
so do not have to worry about this anyways.
I will be using the handles on Analogs and Digitals so will have to drill a
few holes on my analog sticks shafts. It shouldnt be to difficult to do.
Visitor Q:
I posted the wrong link, I meant will it fit this one here?
http://www.happcontrols.com/joysticks/95070100.htm
Xiaou2:
Im sure it would. Thats the same handle as the Tron handle.. just in
black color. Sorry, I didnt notice that stick before. I have a different analog stick...
(the pic I posted).
Ummon:
But what about this one?
Certainly the design is more efficient, as well as more attractive, hardware-wise. In any case, the only issue I can see is the bottom holding together, as the Tron has no underneath mounting, and the shaft of this stick isn't long enough for both screws. I guess one would do. Also, some modification of the new handles would be required if one wanted to populate it with the dual thumb buttons from this one.