Main > Main Forum

Momo and G25 Steering

Pages: (1/4) > >>

BadMojo12:

I am designing my control panel and I want to have enough "lip" on the front of the panel to accommodate a G25 or Momo Steering wheel.  I saw great discussions and YouTube video on these wheels for mame, but find nothing on the "footprint"--over and under the panel--required for these wheels.  Any information on this will be greatly appreciated.

Ryan

Ginsu Victim:

Edit: Previously in wrong forum.

Flake:

I'm not at home right now and so cant measure to be sure but you dont need much more than 5"-6" if that, on the top of the panel.  The underneath of the "lip" will only require a couple inches.  I'm using a standard 2p control panel from ArcadesRFun and have enough clearance.

drawfull:

For the G25, 6.75" gives you a few mm spare on top. You need appx 1.25" beneath horizontally. It's difficult to easure on my setup (cramped)

The gearshift needs the same, but it looks like

\
 \
  \________ in profile so make sure you have nothing vertical behind it that would get in the way



BadMojo12:

Thanks drawfull, that's exactly what I needed  :applaud:

Flake, yours is also helpful, do you have a G25 or a Momo?

RC

Pages: (1/4) > >>

Go to full version