| Main > Main Forum |
| Have I bought a fake Seimitsu LS-32 stick? |
| (1/2) > >> |
| zoltar:
I recently bought a Seimitsu LS-32 from starcab.net, and there are some strange things about it that makes me suspect that this isn't a real LS-32. I was hoping someone could tell me if it's real or not. (1) The holes in the mounting plate doesn't look like the holes I've seen in pictures of the LS-32. It may be that there are a lot of mounting plate options, and if so, please let me know. Here's a picture of my mounting plate: (2) The microswitch terminals are not oriented in exactly the same way as the ones in other LS-32 pictures. Again, here's a couple of pictures of the stick I received: One more thing: When I first got it, one of the four screws on top of the mounting plate wasn't screwed in straight. This was because there wasn't a perfect fit between the holes in the mounting plate, and the holes in the blue plastic that it attaches to. (I was able to make this a lot better by removing all four screws, and screwing each one a little bit while constantly alternating between them, making them go in in parallel.) What do you guys think? Is it possible that this is a fake LS-32 consisting of cheaper knockoff parts? |
| Bleagh:
There are surely knock offs out there. Does the name Seimetsu appear anywhere on the stick? |
| zoltar:
--- Quote from: Bleagh on November 05, 2008, 12:43:43 am ---There are surely knock offs out there. Does the name Seimetsu appear anywhere on the stick? --- End quote --- No, not that I can see. Where should it be written? |
| kowal:
haha seimitsu never use logo, only on PCB microswitches ver. LS-32-01 look OK for me check microswitches, original is matsushita and have only 2 terminal LS-32-01 use s-plate on foto is normal LS-32 plate is ok konckoff have Yenox, zippy and other crap micro |
| zoltar:
--- Quote from: kowal on November 05, 2008, 10:17:09 am ---haha seimitsu never use logo, only on PCB microswitches ver. LS-32-01 look OK for me check microswitches, original is matsushita and have only 2 terminal LS-32-01 use s-plate on foto is normal LS-32 plate is ok konckoff have Yenox, zippy and other crap micro --- End quote --- I opened it up, and it did use Matsushita switches. :) Thanks for your help! |
| Navigation |
| Message Index |
| Next page |