Arcade Collecting > Restorations & repair

Galaga Machine project - It's now ALIVE!

<< < (7/9) > >>

Cyberflexx:
The galaga has finished it's 72 hour burn in and everything works great.  There is a slight hum sound in the speaker, but I can live with that for now.  I am ordering some black matt vinyl for the sides instead of painting.  Rich over at www.thisoldgame.com sells the stuff at a resonable price.  I havent ordered any yet, but I plan to do that sometime today or tomorrow.  I am going to peel off the sideart with a heat gun, fillin all the cuts and blemishes in with a wood filler and sand it smooth, then apply the new vinyl matt instead of painting it. 

I do have a question.  Is Galaga suppose to clear the highscore when the machine is turned off?

RayB:

--- Quote from: Cyberflexx on November 05, 2008, 09:54:04 am ---I do have a question.  Is Galaga suppose to clear the highscore when the machine is turned off?

--- End quote ---
Yes.

Mauzy:

--- Quote from: Cyberflexx on November 05, 2008, 09:54:04 am ---
I do have a question.  Is Galaga suppose to clear the highscore when the machine is turned off?

--- End quote ---

This is worth every penny.

http://mikesarcade.com/cgi-bin/store.pl?sku=HSGALAGA

Ive used one for about a year. So far my high score still stands at 210,000 and change sped up, 150,000 and change original speed.

Cyberflexx:
mini update: I started filling in some of the scratches and little screw holes from the cup holders with some wood filler.  I tested the coin mechs about 20 times each, they all seem to work without problem.  I am placing an order for some black matt vinyl so I dont have to paint the cabinet.

gatordad:

--- Quote from: Cyberflexx on November 06, 2008, 08:36:40 am ---mini update: I started filling in some of the scratches and little screw holes from the cup holders with some wood filler.  I tested the coin mechs about 20 times each, they all seem to work without problem.  I am placing an order for some black matt vinyl so I dont have to paint the cabinet.

--- End quote ---

Where from?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version