I've got a BUNCH of them in various speeds - both tested pulls and new, but since it's a hobby based business and I have a full time day job, I haven't gotten inventory updated yet.
Sigh. I need a vacation from the day job to get about 150 new SKUs added to the site and about 1200 chips added into existing SKUs.
I sent you a PM about your board, but dummy me forgot that the symptoms were listed on this thread. You can always swap the 2114 SRAMs around to see if you can get the board to come to life enough to give you a RAM Error message. Same thing for the CPUs - swap the first and third CPUs around.
Just beware of the following:
- The CPU & ROM sockets SUCK on Galaga boards. Don't be surprised to find intermittent ones
- Legs on the custom chips are prone to corrosion and may fall off when cleaning. You may need to solder on a new leg or three to fix them.
If you run into leg problems on the custom chips you should get a good quality double wipe socket, fix the chip, put it into the socket, then plug that socket into the socket on the game board.
RJ