| Main > Main Forum |
| jammaboards 6in1 switch board. |
| (1/3) > >> |
| rusolinio:
Hi Guys, I got on of those 6in1 switch board from jammaboards, and have hooked up the -5v to each connector that requires it from my power supply in the cab. How do i cut the -5v to the slot that is not in use when i switch over games? |
| rusolinio:
C'mon, someone MUST have come across this issue before surely? Could i potentially damage my game boards if i apply -5v to them whilst they are not being used? |
| CheffoJeffo:
Does the switch cut off the ground on the non-selected boards ? |
| rusolinio:
yeah. Well, i assume so, seing as though i havent wired any extra ground connections to the switch board. The switch board does not support the -5v line, so it has to be wired from the psu to each slot that needs it (both ki and ki2 require -5v) |
| CheffoJeffo:
If there is no return path to ground, there won't be a circuit, right ? |
| Navigation |
| Message Index |
| Next page |