| Main > Main Forum |
| Arcade VGA and J-pac issue. |
| (1/1) |
| rusolinio:
Hi guys, I just hooked up the Ultimarc Arcade vga card to a j-pac inside my ki2 cab with a wells gardner U2000 monitor, and i get no picture. I'm assuming its because i didnt set the resolution correctly, so could someone tell me a good resolution to start off with for games like killer instinct, mortal kombats, etc...? Failing my assumption, can anyone shed any further light in regards to my issue? |
| CheffoJeffo:
How are the jumpers on the JPac set and what is the sync indicator LED doing ? |
| AndyWarne:
The most common issue is the J-PAC is not connected to the PC USB or PS/2 port so has no power. If this is not the problem, its better resolved by email: andy@ultimarc.com |
| rusolinio:
The jumpers are set at default (15khz and 31khz). i have a 'sync in' amber light on, and the self test led is on constantly (red). i did notice the ps2 port was a little hard to push in, but i made sure it was in all the way. Email sent. |
| Navigation |
| Message Index |