| Main > Main Forum |
| Lcd Top Gun Mounting: Horizontal or Vertical |
| (1/1) |
| Shieldwolf:
I'm using a 27 inch WG monitor. I can't actually use the gun as my cp is currently missing (see other thread), but I wanted to see what the consensus was on mounting in your arcade cab. |
| Turnarcades:
Although horizontal would be arguably easier to conceal, I've found they do work better vertically. |
| Malenko:
--- Quote from: Turnarcades on October 18, 2008, 03:17:19 pm ---Although horizontal would be arguably easier to conceal, I've found they do work better vertically. --- End quote --- I think they work equally bad both ways, however you can stand just a tad closer if you mount them horizontally |
| Shieldwolf:
When I built my cab I did not foresee needing space for light bars. As a result they wasn't enough room for them my bezel and plexi. I ended up putting the bars behind my bezel running vertically on the sides of my monitor. I then cut small slits in the bezel where the sensors are. I made sure that they were not obstructed. I haven't had a chance to test it out, but it looks really nice and you don't notice the holes in the bezel at all. |
| aljupy:
Horizontal: Will reduce your gameplay distance around half meter. Under some distances is slighty apreciated. On a 27" inch I would go for Vertical Set up, You should play from 2,5 or 3 meters wich should not be a pain. Vertical: It is simplest way to hook it. Also is the best way to know that you are inside a "playable" area, because the Bars are ON THE EDGES. Enjoy your Topgun :cheers: |
| Navigation |
| Message Index |