Main > Main Forum
New to this - using J-PAC but buttons 3 and 4 are wired to kick harness??
(1/2) > >>
dailygeek:
Hi all,

As per title really, I understand the J-PAC screw terminals accept extra inputs for buttons 4-8 for two players, but button 3 for both players appears to be hooked into a kick harness.
What is the best way to get these working?  Cut them from the kick harness and somehow wire them to the JAMMA harness?

Confused and crap with wires to should be interesting!  :o
dailygeek:
Anyone??  :-[
SirPeale:
Are you sure this is wired JAMMA?  Because three buttons per player should be in the harness.

Perhaps this is something custom.  What is the game?
dailygeek:
tekken 2 in a generic cab. Am I able to just wire the button 3s to the pins on the back of the jamma harness?
Malenko:

--- Quote from: dailygeek on October 18, 2008, 03:06:41 pm ---tekken 2 in a generic cab. Am I able to just wire the button 3s to the pins on the back of the jamma harness?

--- End quote ---

you can go either way, if you wire them into the JAMMA it becomes true jamma. Tekken 2 is a JAMMA+ because of its kick harness (just like Street Fighter II).  If you wire it into the jamma then you also open up more inputs for the JPAC.
Navigation
Message Index
Next page

Go to full version