Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: I'm in the UK - what are my options?  (Read 2647 times)

0 Members and 1 Guest are viewing this topic.

bertthedefender

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 31
  • Last login:January 10, 2017, 07:37:00 am
I'm in the UK - what are my options?
« on: September 17, 2008, 10:47:33 am »
Hi All,

Had a look for a similar topic but couldn't find one, so here goes.

I'm restoring a 28" BAS Jamma cabinet and converting it to MAME.  The 28" Hantarex Polo was removed before I got hold of the cab so I would like to replace it with a digital multisync such as the 27" WG D9400.

Thing is, where to I get one from in the UK?

I spoke to Brent Electronic (namco.co.uk) and they had some but they were £495 + VAT and delivery.
Is it worth getting one shipped over from the US? Even with $200 shipping, it would be cheaper from X-arcade.com (£380 +VAT)

Anybody got any better options?

Cheers,

B.

Jimbo

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1014
  • Last login:March 06, 2024, 08:12:05 am
  • I have no idea what I'm doing.
    • Wood Finishes Direct
Re: I'm in the UK - what are my options?
« Reply #1 on: September 17, 2008, 11:48:08 am »

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6175
  • Last login:Today at 06:26:35 pm
Re: I'm in the UK - what are my options?
« Reply #2 on: September 17, 2008, 12:28:42 pm »
pentranic went out of business two months ago,hantarex do not support crt products anymore but have a few 25" polostar in stock,kaga/sanwa ceased operation last week.

the only crt 29" tri sync available atm is the makvision from suzo,its about £350

Rickn

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 478
  • Last login:May 08, 2020, 01:32:28 pm
Re: I'm in the UK - what are my options?
« Reply #3 on: September 17, 2008, 09:09:56 pm »
Hey Grant, did not re-alize Pentranic UK went down. Any links to show this??

Next question, perhaps I need to re-think the UK and find a distributor... are my right 350 lbs is like 700 USD.

Rick
Always happy to help.., for the best in displays
Rick Nieman
Rick@Niemandisplays.com
www.niemandisplays.com
1023 Rife Rd Cambridge, Ontario Canada N1R5S3
519-621-1722

bertthedefender

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 31
  • Last login:January 10, 2017, 07:37:00 am
Re: I'm in the UK - what are my options?
« Reply #4 on: September 18, 2008, 05:04:20 am »
Hey Grant, did not re-alize Pentranic UK went down. Any links to show this??

Check it out:
http://wck2.companieshouse.gov.uk/f6c06eef5e1647389a52d941972bf185/compdetails

the only crt 29" tri sync available atm is the makvision from suzo,its about £350

Thanks Grant, I bet thats an analogue though eh? I really need it to remember all the geometry settings between resolutions.  Why oh why do I like switching between medium and low-res games every 5 mins! ??? But I suppose you pays your money and takes your choice.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6175
  • Last login:Today at 06:26:35 pm
Re: I'm in the UK - what are my options?
« Reply #5 on: September 18, 2008, 06:59:09 am »
you want the wei ya m2929,this is a digital chassis
do some searches on google as i have seen these available in the far east,import would cost a few quid

Jimbo

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1014
  • Last login:March 06, 2024, 08:12:05 am
  • I have no idea what I'm doing.
    • Wood Finishes Direct
Re: I'm in the UK - what are my options?
« Reply #6 on: September 18, 2008, 09:40:49 am »
pentranic went out of business two months ago

Ah... that'll explain why they didn't answer my email I sent them a couple of weeks ago!

kujina

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
  • Last login:November 04, 2021, 12:07:40 pm
Re: I'm in the UK - what are my options?
« Reply #7 on: October 29, 2008, 02:06:03 pm »
I'm also trying to source a 27" digital multisync, any progress on your searches?
I contacted wells gardner directly about a D9800, the price is $395 + $475.12 shipping, when you convert that and add vat/customs duty it adds up to about £601!