| Main > Main Forum |
| 1st cabinet questions |
| << < (3/4) > >> |
| ArtMAME:
How much clearance do you have inside the cab? What is the inside width? You may have to re-position the glass (not difficult) to accommodate the TV. As far as the box for the control panel, I took a bunch of pics of my current cab and I will send those to you. |
| Jack Burton:
if you want to redo the control panel the cheap and easy way, just buy a piece of plexiglass and drill your CP holes in it and your old CP then fit over the old one. You will want to put something underneath the plexiglass to cover up the ugly old holes. |
| subedriver:
thought about doing that for the time being. will need to find the bottome part of the mortal kombat cp graphic to put under it. at least thats whats on there now. i order new red t molding and am keeping the mortal kombat marquee. can i just glue on the new art work or do i need to get a sticker of some sort for it? |
| kegger:
I used a TV in my cab and I found the easiest way to get the TV in there some what secure is to build a shelf and angle it so it align's up with the glass or bezel. Then I placed a couple of 1x3 peices of wood behind it to keep it from falling or sliding back. The only issue I had with a TV was heat and even after I made a huge vent in the back door of the cab the TV would still over heat. But I know some people have never had any problems with heat using a TV for a display. :cheers: Here is a pic of my current cab with the back vented. |
| subedriver:
guess i could add fans if needed, didn't think about heat with the tv being an issue. |
| Navigation |
| Message Index |
| Next page |
| Previous page |