| Main > Main Forum |
| Critique my blueprint. Warning; it's big. |
| << < (2/3) > >> |
| The cranky hermit:
Ok, I've made some changes. I've shrunken down the trackball image to 75% of its original size. Hopefully this is what a Wico/Suzo 2 1/4" trackball looks like fairly accurately. I've also made the panel a bit smaller. |
| u_rebelscum:
FWIW, happs 2 1/4" mounting plate is 6" by 6". |
| The cranky hermit:
I'm buying an Atari 2 1/4" mounting plate. What are the dimensions of that? |
| The cranky hermit:
Bump. I've also shrunken down the blueprint a bit. It's not full size anymore, but at least it won't take forever to load, and it won't make your scroll bar huge either. |
| u_rebelscum:
--- Quote from: The cranky hermit on June 15, 2003, 12:17:08 pm ---I'm buying an Atari 2 1/4" mounting plate. What are the dimensions of that? --- End quote --- Happs is the same as Atari AFA trackballs and trackball plates are concerned (2 1/4" & 3"); happs licenced the TBs plans from Atari. So, 6"x6". |
| Navigation |
| Message Index |
| Next page |
| Previous page |