| Main > Main Forum |
| Pinball Plunger and Circuit |
| << < (3/6) > >> |
| Dazz:
--- Quote from: thatitalian on October 08, 2008, 08:15:53 am --- --- Quote from: Dazz on October 08, 2008, 08:06:04 am --- --- Quote from: thatitalian on October 08, 2008, 08:04:08 am ---Hey Dazz, Could you post it to a hosting site then post a link? (off topic: how is HS progressing? How is the theme installer coming along?) --- End quote --- To my image or to the actual circuit? --- End quote --- To both if you can! I always swing by the HS site! Love the frontend! I recently updated the software, but haven't read over the new process. Will drop past and have a read! --- End quote --- |
| thatitalian:
Where did you get the plunger and physical circuit from? That plunger looks super easy to mount! And that circuit means nothing to me! :dizzy: Like, I said, I am rubbish with this stuff! Could anyone assist with construction, I am more than willing to pay! |
| Franco B:
Hmm, I see the pinball emulators let you control the strength of the ball release by holding down a key. You could do the same thing mechanicaly as the optical sensor by making a leaf switch set up but by making the circuit normally closed (NC) and attaching one of the leafs to the end of the plunger. Just a thought. |
| mountain:
--- Quote from: Franco B on October 08, 2008, 09:02:24 am ---Hmm, I see the pinball emulators let you control the strength of the ball release by holding down a key. You could do the same thing mechanicaly as the optical sensor by making a leaf switch set up but by making the circuit normally closed (NC) and attaching one of the leafs to the end of the plunger. Just a thought. --- End quote --- I was going to try that but I liked the cool factor of using something non-mechanical. I feared that over time the leaf would wear out. --- Quote --- I chose to use a reflective opto-switch to sense the presence of the plunger's home position and a debounce circuit to remove any bouncing effects from the plunger. Without a debounce, the bounce of the plunger after release would behave like hitting the assigned plunger key in Visual Pinball repeatedly. --- End quote --- Plus, after reading this from John's retro arcade, I didn't want to revisit the plunger down the road if it failed to work correctly using the leafs. The plunger circuit is perfect, I am very happy with it. |
| thatitalian:
How did you go about creating the circuit? I thought the same thing about it wearing, but as I am not good with circuits it seemed like the only option! I would like the optical route to be honest, could you assist? The only thing I know about circuits is using an etching pen and etching tanks to create the layout....... that is about it really! ::) |
| Navigation |
| Message Index |
| Next page |
| Previous page |