| Main > Main Forum |
| 2 quick problems. |
| (1/3) > >> |
| clickhea:
iam sure both of these have a very easy fix 1) the tops of the u360s keep coming loose no matter how tight i make them even with that small metal ring on... iam thinking about taking a channel locks to them wrapped in a towel, but i wanted to see if iam missing somthing before i do this. 2) my turbotwist 2 isnt working at all, its plugged in and everything. Trackball works perfect, but nothing at all from tt2 spinner, what am i overlooking? thanks in advance. |
| Ginsu Victim:
Have you inserted a flathead screwdriver into the end of the shaft and tightened the top while twisting in opposite directions? Mine never have come loose. All else fails, a drop of crazy glue would do the trick. |
| clickhea:
iam sorry are we talking about the same piece? iam referring to the black bat top (the handle part) |
| Ginsu Victim:
I know on the balltops, the shaft has a screwdriver slot on the end where the magnet attaches. Slide a flathead in there, and hold it steady while you twist the top on tight. I thought the bats were the same. From Ultimarc: Locking the threaded handle top. If problems are experienced with the handle unscrewing, there is a screwdriver slot available on the end of the shaft, to hold the shaft stationary while tightening the handle. This is accessible by removing the PCB and the magnet assembly. After using this slot, check that no burring of the end of the shaft has occurred, which might prevent the magnet assembly from seating. Remove any burr using a fine file if necessary. |
| DeLuSioNal29:
I've had that problem with my TT2. Turns out it's the USB motherboard connection. I don't know why, but when I plug it in a certain USB port, it doesn't work. When I plug it into another, it works just fine. :dunno ~ D |
| Navigation |
| Message Index |
| Next page |