| Main > Main Forum |
| Randy T.: Can an LED-Wiz be used to drive pinball solenoids ??? |
| << < (7/9) > >> |
| mark shaker:
--- Quote from: AndyWarne on September 30, 2008, 10:48:45 am ---This would work although the solenoids would need additional darlington drivers. Many people have used our Pac-Drive boards for pinball drivers. Note if you use a LED controller which uses modulation to vary brighness you need to ensure the modulation can be turned off and a solid on or off sent to the solenoid. Andy --- End quote --- Ultimarc products are terrific. I'm using about a dozen total I-Pacs and Opti-Pacs. Thinking of controllable LEDs + solenoids: The Pac-Drive can handle a total of 64 (16 outputs x 4 boards) . The Led-Wiz can handle a total of 512 (32 outputs X 16 boards). The U-HID can support 400 (50 outputs x 8 boards). Based on that, assuming that the modulation can be turned off, I'd have to go with the Led-Wiz or U-HID. BTW: The A.C. Game Systems PC to Pinball Interface also handles lighting. But he has not yet replied to my e-mail questions. Another BTW: Randy T.: Where are you? - Mark |
| Hoopz:
--- Quote from: mark shaker on September 30, 2008, 07:30:47 pm ---Ultimarc products are terrific. I'm using about a dozen total I-Pacs and Opti-Pacs. - Mark --- End quote --- You need to post a picture of THAT control panel!!!! ;D |
| mark shaker:
--- Quote from: Hoopz on September 30, 2008, 07:52:57 pm --- --- Quote from: mark shaker on September 30, 2008, 07:30:47 pm ---Ultimarc products are terrific. I'm using about a dozen total I-Pacs and Opti-Pacs. - Mark --- End quote --- You need to post a picture of THAT control panel!!!! ;D --- End quote --- I do have one Cab that uses: 3 - Ultimarc I-Pacs 2 - Ultimarc Opti-Pacs 4 - AKI Analog Kontrol Interfaces 1 - Druin's LS30 Rotary Interface Suffer! >:D |
| Hoopz:
Very nice. Care to share all the details or do you have a thread with info about it? :cheers: |
| mark shaker:
--- Quote from: Hoopz on September 30, 2008, 08:27:41 pm ---Very nice. Care to share all the details or do you have a thread with info about it? :cheers: --- End quote --- Check out Sybil at: http://www.marksarcade.com/ Most of the interfaces are mentioned on the Control Panel's page, but I forgot to mention the I-Pac in the Admin Panel and the AKI for the pedals. - Mark |
| Navigation |
| Message Index |
| Next page |
| Previous page |