| Main > Main Forum |
| trying to have a coin register a credit but ends up in the return slot Non MAME |
| << < (2/3) > >> |
| mrclean:
how do I do this, and where can i purchase them from , oh yeah and ginsu, i'm getting close but i think i had a bad JAMMA harness i got all my buttons functioning with the exception of "fire right". So i think i need to get a different harness. I hope it was a bad JAMMA harness. It could be the PCB, or could be the Capcom Classic to JAMMA Adapter I'm not sure. |
| SirPeale:
I'm reading this right, you're trying to get a quarter to give you credits, but when you drop a quarter it ends up in the reject, is that correct? If it is, you need quarter mechs. Likely you have token mechs. I have some brand new Happ mechs for $15 plus shipping, or some used ones for $5.00 each plus shipping. It's just a matter of removing the old mechs and putting the new ones in their place. |
| Ken Layton:
If the "lockout coils" are not energized then all coins inserted will be rejected to the coin return hole. 5301-10 should be a US quarter acceptor. Appears you have this door: http://arcarc.xmission.com/PDF_Coin_Mechs_Etc/Coinco/Coinco_2802_Series_Game_Door.pdf |
| mrclean:
yeah that looks like an exploded view , so ken how to i fix this issue ? or energize the coil ? |
| SirPeale:
Bloody hell...can't believe I missed that. You can just remove those lockout coils. Just tie the wires to the side. Let me guess: converted Atari cab? |
| Navigation |
| Message Index |
| Next page |
| Previous page |