Main > Main Forum
I'm trying to get my first Non MAME up and running with JAMMA Harness Help me !
<< < (3/3)
mrclean:
for whatever reason what i did was removed the plastic molex connector, cut and stripped all the monitor wires along with the ones from the JAMMA harness and now i get a nice and crisp picture!! just slightly shifted to the left how do i correct this ? * Edit* fixed off the tiny pcb board off the monitor adjusted and tweeked it that way

well now i need to wire either the coin door / set it to free play, and then all the buttons with the joystick

then need to get power to those daisy chained lights behind the marquee, and that's pretty much it other than cosmetics.

remaining bundles in one i have an extra long orange..

white bundle i think is for the speakers

extra black and green together

and then respectivly two other bundles presumably p1, p2 controls

getting closer
Stobe:
good to hear.  Probably a bad crimp job on the molex connector or something.  or one of the pins got pushed back?

-Stobe
mrclean:
I can't get the speakers/ audio working and i'm positive on dip switch bank "B" for demo audio i turned it on. So i should be hearing something, I know it's the white wire's I'm supposed to be utilizing from the JAMMA harness. The original taito cab had a volume control knob.. i will post pictures later this evening so someone might be able to better help me.
mrclean:
After testing each wire in terms of process of elimination all seem to be working with the exception of "Fire Right"

I was able to get:

Add Coin
Player One
Player Two

Up
Down
Left
Right

Fire left
Fire Straight
*i had two unused wires in this bundle which one should be fire right but neither wire does anything, one is white and one looks aqua frustrated because i'm very close to getting the buttons all working

strange that when i go into *test mode* on the board player 2 controls seem to work also with the exception of that particular input, however during game play none of the player 2 buttons functions maybe it has something to do with the dip switches ??
Navigation
Message Index
Previous page

Go to full version