| Main > Main Forum |
| Removing gunk / adhesive on a metal panel to get it down to shinny silver |
| << < (4/4) |
| mrclean:
I have since removed all the gunk from the metal panel, and drilled holes however they need to be slightly bigger for my buttons to fit, What tool should i use to attach to my drill to widen the hole ever so slightly. the original holes that are on the panel are just a bit too small like a hair line. |
| CheffoJeffo:
--- Quote from: KeithD on September 28, 2008, 12:39:11 pm ---Right there in the kitchen with a glass of wine. Awesome! My wife would have my head on a platter... :notworthy: --- End quote --- I am the Cheffo -- the kitchen is my domain!!! Well, that and Mrs. Cheffo wasn't home that night. ;) |
| KeithD:
--- Quote from: mrclean on September 28, 2008, 01:37:20 pm ---I have since removed all the gunk from the metal panel, and drilled holes however they need to be slightly bigger for my buttons to fit, What tool should i use to attach to my drill to widen the hole ever so slightly. the original holes that are on the panel are just a bit too small like a hair line. --- End quote --- Do you have a file? Or you can wrap some sandpaper around a pipe or dowel and get that in there. The backyard method is to stick the drill back in there and kind of work it around while it spins, but that generally leads to either a mistake or an ugly hole. What size is the hole? K |
| Navigation |
| Message Index |
| Previous page |