| Main > Main Forum |
| Would this adapter work, what else do i need to purchase to get my cab running |
| (1/1) |
| mrclean:
I'm looking to build a Gun.Smoke few questions reguarding parts first OK so i'm taking on a project I bought a taito cabinet which had Mr. Do inside of it, non-working. I don't have time for a cap kit, or to fix a monitor so I have a brand new 19'' on the way. Power supply inside the cabinet seems to be working because it lights up the coin doors, and my speaker hums loudly I already removed the Mr. Do pcb, waiting for Gun.Smoke PCB in the mail. To my understanding This game used a certain pin-out, so should I buy a classic capcom to JAMMA adaptor to make my life easier? and then just purchase a JAMMA Loom / wire harness I have all the leaf buttons, as well as a wico joystick thanks to GinsuVictim so what else do i need? Brand new 19'' Gun.Smoke PCB Power Supply Capcom classic to JAMMA adaptor Jamma Wire Loom / Harness What am I missing if anything ? This is going to be my first conversion / dedicated non MAME cabinet although I was told that it's more simple to me it seems more complicated just for right now before getting into any thing too technical do I have the required parts are they correct for what i'll need for functionality ? i noticed that for the capcom to jamma adaptor Jammaboards.com is literally no wires just an adapter / with finger board and is alot cheaper any reason ? it's like 17.95 vs. Arcade Shops, 45.00 ?? any difference or just a good deal?? Arcadeshop.com $45.00: Jammaboards.com $17.95: does that chinese writing contain led paint ?? is that why it's cheap |
| Navigation |
| Message Index |