Little update...
I got the tracking numbers of my missing buttons and t-molding, should arrive Friday. Just in time for the weekend to install.
Here is some info about the subwoofer and PC mounting..
Here is a picture of how i mounted the subwoofer of the logitech z2300 set.
The subwoofer has its own box, the box is made of 1.8cm thick mdf and is standing on 3 thick pine wood pieces of wood connected to the bottom plate. So its completely free of the sides or back
The opening of the box for the sub is flush with the backplate. it has a little angle. this way both the woofer and bass reflex pipe output directly to the outside. there is a 5-7cm gap between the wall and the opening of the subwoofer box.
its the best way i think to place this sub in the cab.
Mountain came up with the idea, big thanks !
His idea with the woofer outputting to the floor was better, but not possible with my cab design.
It sounds great, much better then when i placed the sub without the box in the cab.
Its more controlled..
then just above the subwoofer is the PC panel.
all the components are fastened with screws and brackets. all the heat is outputted to the back and can go up to the cab's fans.
the PC system is completely passive.
Zalman 500 watt
passive heatsink power supply.
core2duo e8500 2x3.15ghz with coolermaster
passive cpu cooler. maybe ill install a fan on this cooler and overlock tot 2x3.5ghz
4 GB ram dd2 800MHz
Ati x800 XL 512 Mb
passive Pci-e Videocard. Also have bought a Radeon 3870 passive for it . but it its new for soft15KHz
Wificard 54G pci card
DVD player
750 GB Samsung Spinpoint f1 Sata-II (very silent) with extra hdd cooler and hdd silencer
I built a simple videocard/wificard holder
And i worked on the backplate for the subwoofer grill
Drew out the subwoofer box opening
Finished
Power button and socket with filter
Bought a aluminium grill and some more paint
for making a grill for this hole..
Cut it to size
Primed it
Painted it with 4 layers of spray matt paint
Its still drying
result of it tomorrow.