Main > Main Forum

Help Mortal KOmbat 1 block stopped working

Pages: << < (2/2)

ToplessZ:

might be a loose wire connection where it connects to the jamma pin, you might need to repin that wire or at least take some solder and solder it up to the pin to make sure it has a good connection.

ctozzi:

the jamma connector looks fine but in the process of cleaning and pushing pulling the pin broke, so now i need to repin the wire. Does home depot/ lowes carry this  ? In the process of fiddle farting with this another pin broke loose in the jamma harness so now player 1 high kick does not work either. So now i need to put 2 new pins in there. Not a huge deal but I need to find the pins them selves. And I'm not even sure this is the issue either. But it's a hobby and there are always going to be hiccups so I'm not gonna get all flustered

ctozzi:

is this what I need to repin the 2 wires inside the jamma harness ?
http://www.jammaboards.com/store/connectors-pins/2-54mm-100-molex-connectors/molex-2-54mm-100-female-crimp-pin/prod_36.html

ctozzi:

those connectors worked like a charm, i soldered them to the wires and put them in the back of the jamma harness. Works and looks like new !!!!!!!

Pages: << < (2/2)

Go to full version