| Main > Main Forum |
| Help Mortal KOmbat 1 block stopped working |
| (1/2) > >> |
| ctozzi:
player 1 block stopped working today. I checked the wires, jamma harness, and replaced chery switch. There is no signal from the button when pressed. I do not know what to do. Please help. |
| Malenko:
what happens when you touch the block wire to the ground wire? I had a similar issue, the jamma pin was loose. |
| ctozzi:
it's working again, i removed the jamma harness and wiggled the wire around and it works again. the machine is 16 yrs old so I guess i'll be patient with any small issues. |
| ctozzi:
so this keeps on happening it works then stops in the middle of a round i'm frustated and not sure what to do. I changed the cherry master switch, removed the jamma harness and cleaned it and it still screws up |
| BobA:
Try cleaning the contacts on the PCB. |
| Navigation |
| Message Index |
| Next page |