Main > Main Forum

Wire 2 joys on player 1?

Pages: (1/2) > >>

georgemcfly:

When you wire in a 4 way joy and 2 buttons, are they just spliced into the player 1 up/down/left/right and 1/2 buttons? I was planning on going with a small 2 player layout but wanted a setup for old games as well. If its that easy, I'm modding my CP layout.

Hoopz:

You don't need to splice the wires, but you can easily connect two wires to the inputs for P1 Joy and buttons.  It's a simple step to take.

georgemcfly:

wire both wires into the input on my ipac2 for the shared ones?

scotthh:


--- Quote from: georgemcfly on September 12, 2008, 01:01:55 pm ---wire both wires into the input on my ipac2 for the shared ones?

--- End quote ---
yes. I did that with some push buttons.

TAG:


--- Quote from: georgemcfly on September 12, 2008, 01:01:55 pm ---wire both wires into the input on my ipac2 for the shared ones?

--- End quote ---

Or I believe that you can run wires between the shared connections, and just attach one to the IPAC, rather than wiring each separately to the IPAC.

Pages: (1/2) > >>

Go to full version