Main > Main Forum
Wire 2 joys on player 1?
(1/2) > >>
georgemcfly:
When you wire in a 4 way joy and 2 buttons, are they just spliced into the player 1 up/down/left/right and 1/2 buttons? I was planning on going with a small 2 player layout but wanted a setup for old games as well. If its that easy, I'm modding my CP layout.
Hoopz:
You don't need to splice the wires, but you can easily connect two wires to the inputs for P1 Joy and buttons.  It's a simple step to take.
georgemcfly:
wire both wires into the input on my ipac2 for the shared ones?
scotthh:

--- Quote from: georgemcfly on September 12, 2008, 01:01:55 pm ---wire both wires into the input on my ipac2 for the shared ones?

--- End quote ---
yes. I did that with some push buttons.
TAG:

--- Quote from: georgemcfly on September 12, 2008, 01:01:55 pm ---wire both wires into the input on my ipac2 for the shared ones?

--- End quote ---

Or I believe that you can run wires between the shared connections, and just attach one to the IPAC, rather than wiring each separately to the IPAC.
Navigation
Message Index
Next page

Go to full version