| Main > Main Forum |
| Desperately looking for light blue pushbuttons |
| << < (2/3) > >> |
| fatfingers:
--- Quote from: JC on September 10, 2008, 04:05:51 pm ---I've heard a lot of concerns about leaf buttons though, e.g. that they are no longer manufactured, that they are a pain to install, and that they require frequent cleaning. How much of that should I be concerned with? --- End quote --- Based my newbie experience with them, none of it should concern you. |
| JC:
Bump for additional opinions... Thanks! |
| Blanka:
If it says they're only for 2-4mm, then just make a sandwich of mdf layers with the top layer being 4mm. Or drill two holes from each side in your wooden panel with a spade drill bit. One the top side you do 4mm with the right size spade bit, the other side you do the rest of the thickness with a 10-15mm larger spade bit. |
| ToplessZ:
Dont buy those buttons that have the microswitch built in, if the switch goes bad you gotta replace the whole button! |
| shmokes:
Leaf switches are fine. They're not as maintenance-free as microswitch buttons, but you're not building a machine that will be abused by thousands of strangers in a public arcade, either. For home use, you'll more or less be able to install them and forget about them. |
| Navigation |
| Message Index |
| Next page |
| Previous page |