| Main > Main Forum |
| U360 restrictor opinions |
| << < (5/6) > >> |
| Ginsu Victim:
--- Quote from: Ummon on September 09, 2008, 09:40:39 pm --- --- Quote from: GinsuVictim on September 08, 2008, 01:52:15 pm ---I've pointed TheShanMan toward the JLW restrictors at LizardLick, which I believe to be the same thing, only cheaper. --- End quote --- Except for the octagonal - which is functionally the same - these are the same looks to me. Hmmm, the extra mounting shafts, or somethingl like it, may be available at your local hardware store. --- End quote --- No, they are special made. I mean, you could probably rig your own, but not easily. I suggest just ordering from Ultimarc. |
| TheShanMan:
OK, no big deal. That guy PM'ed me to say he'd see if he could find his, but I haven't heard from him since. Still overpriced for sure, but it's not quite as bad as comparing $14 to LizardLick's $4.95 restrictor. |
| Stub:
FYI, I ordered a oct restrictor earlier this year, from Ultramarc, as a test, and the plate did not fit properly, the screw holes were slightly to close together and I had to dremel them oblong to fit on my posts. Just letting you know it was very annoying for buying something made for the device. The other two fit perfectly. ( Circ and Square ) |
| Ummon:
--- Quote from: Stub on September 10, 2008, 10:08:51 am --- FYI, I ordered a oct restrictor earlier this year, from Ultramarc, as a test, and the plate did not fit properly, the screw holes were slightly to close together and I had to dremel them oblong to fit on my posts. Just letting you know it was very annoying for buying something made for the device. The other two fit perfectly. ( Circ and Square ) --- End quote --- Could've been part of an off batch. Always, anything with Ultimarc, holler at Andy. Nicely, of course. He'll square it away. --- Quote from: Ginsu Victim on September 09, 2008, 11:04:14 pm --- --- Quote from: Ummon on September 09, 2008, 09:40:39 pm --- --- Quote from: GinsuVictim on September 08, 2008, 01:52:15 pm ---I've pointed TheShanMan toward the JLW restrictors at LizardLick, which I believe to be the same thing, only cheaper. --- End quote --- Except for the octagonal - which is functionally the same - these are the same looks to me. Hmmm, the extra mounting shafts, or somethingl like it, may be available at your local hardware store. --- End quote --- No, they are special made. I mean, you could probably rig your own, but not easily. I suggest just ordering from Ultimarc. --- End quote --- I bet there's something at the hardware store that would work. Hell, ask Lizard Lick, they might have something, never know. |
| Ginsu Victim:
--- Quote from: Ummon on September 11, 2008, 08:12:40 pm --- --- Quote from: Stub on September 10, 2008, 10:08:51 am --- FYI, I ordered a oct restrictor earlier this year, from Ultramarc, as a test, and the plate did not fit properly, the screw holes were slightly to close together and I had to dremel them oblong to fit on my posts. Just letting you know it was very annoying for buying something made for the device. The other two fit perfectly. ( Circ and Square ) --- End quote --- Could've been part of an off batch. Always, anything with Ultimarc, holler at Andy. Nicely, of course. He'll square it away. --- Quote from: Ginsu Victim on September 09, 2008, 11:04:14 pm --- --- Quote from: Ummon on September 09, 2008, 09:40:39 pm --- --- Quote from: GinsuVictim on September 08, 2008, 01:52:15 pm ---I've pointed TheShanMan toward the JLW restrictors at LizardLick, which I believe to be the same thing, only cheaper. --- End quote --- Except for the octagonal - which is functionally the same - these are the same looks to me. Hmmm, the extra mounting shafts, or somethingl like it, may be available at your local hardware store. --- End quote --- No, they are special made. I mean, you could probably rig your own, but not easily. I suggest just ordering from Ultimarc. --- End quote --- I bet there's something at the hardware store that would work. Hell, ask Lizard Lick, they might have something, never know. --- End quote --- Nothing I've ever seen... |
| Navigation |
| Message Index |
| Next page |
| Previous page |