Main > Main Forum
How do I remove contact cement?
(1/3) > >>
javeryh:
I have a thin layer of contact cement on top of some plexiglas that I want to remove.  So far I've been scraping with a razor but it is SLOW.  Is there anything I can do to speed this up?  I'm thinking of maybe some type of solution I can apply with a q-tip that will dissolve the glue or something.... any ideas?
HaRuMaN:
Acetone might work
javeryh:

--- Quote from: HarumaN on September 02, 2008, 04:51:20 pm ---Acetone might work

--- End quote ---

Nail polish remover?  What effect (if any) do you think a drop or two will have on MDF?  There is a good chance that no matter how careful I am with the acetone I will get a bit on the adjacent MDF...
HaRuMaN:
Acetone on MDF will probably have no effect at all.  It's a pretty volatile compound, and will evaporate quickly.
miles2912:
I would test it on a piece of scrap MDF just to be sure ...
Navigation
Message Index
Next page

Go to full version