| Main > Main Forum |
| U-Trak review with pics and vids ***UPDATED WITH FINAL RESULTS*** |
| << < (6/9) > >> |
| KapnKerfuffle:
Great review and helped me a lot. Sorry for the necropost, but I thought many people would find this thread when they mount their u-trak. One problem with the u-trak diameter is that the hole you must cut to mount it with the bezel is 3-3/8". There is no hole saw that is 3 3/8" (at least not anywhere I've seen). The directions recommend using a 3 1/2" hole saw. But the bezel will still be loose after this and need to be glued down. This is not a big deal, but my thinking was that I might want to redo my panel someday and I didn't want to glue the bezel down. I got an exact perfect fit with a fly cutter. It seems a bit brutal and clunky at first glance, but it did the job extremely well. The trim bezel fit so snug, I didn't even need to glue it. |
| blind_dado:
Glad to see someone is getting some use out of my review! I never did post a follow-up with the final results, so here is how things turned out with actually mounting the U-Trak. I used 5/8" inch MDF with 1/8" plexi and 1/8" routered out of the bottom to make the overall thickness for the U-Track 5/8". I'm very happy with the results and it works great. Here is what the 1/8" routered spot looks like on the underside: Here you can see how I needed to use several washers to make the supplied bolts not extend past the nut inserts (see my review above describing this issue): And here are the final results from above: This shows the artwork a bit better, which is based on the movie poster for 2001: A Space Odyssey: |
| edge10:
I just stumbled upon this thread. Thanks for the review. I really like how the 2001 themed panel came out. |
| DashRendar:
Great review! :notworthy: Wrong forum. :hissy: |
| Yohan:
Could someone do a small write up on how you wire in the mouse buttons? I have looked at the Ultimarc page but a picture or small write up would really help me out. |
| Navigation |
| Message Index |
| Next page |
| Previous page |