Main > Project Announcements
Console Joysticks in the Works. - NEW PHOTOS!! UPDATED 2/14/09!
Kaytrim:
One other thing to keep in mind is that Happ parts need more room then the Sanwa or Seimitsu parts. If you plan on using Happ parts you will need to adjust these plans accordingly. For this style of case I would recommend using the Japanese parts as they take less effort to move then the Happ parts. The weight of cases this size are rather light and would move around if you get too rambunctious. Of course if you go with the Happ parts the increase in size would about double the weight. If you need more weight you could add some iron or led to the inside of the case.
Gatsu:
thats a good point Kaytrim. I forgot to mention that.
Also, I'm almost finished with the artwork you needed man. Should have it finished by later tonight.
Gatsu:
here's a few nicer pics of the joystick, showing it off a little better. (last one is a tad blurry....dunno why.
Its for sale if anyone is interested.
Gatsu:
Got a few new pics of a new stick WIP. This one's gonna be black & blue with Mass Effect artwork. Another Happ stick.
Buttons are blue & joystick will be black.
Its in the final painting stages now and should be ready to assemble by tomorrow if not tonight. Krylon dries real quick. But I'll make sure to let it sit overnight once I put the clear coat on it.
Gatsu:
Here be some updated pics of the newly painted stick.
I'll have nicer photos up once I finish the stick 100%. Just gotta place the joystick, mount the pcb and run the wires.
Lemme know what you guys think.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version