| Main > Buy/Sell/Trade - non-retail |
| Looking to get a Control Panel made. |
| (1/3) > >> |
| wonkalow:
Im building a MAME machine but there isnt a snowballs chance I'll be able to make a Control panel even resembling of something useful. So im hoping to find someone who can make one for me. Im looking for something very similar to the IMG below (thanks Atomsmasher for the img from cp thread in main). The CPO, Buttons, etc I can handle, its just the actual CP, holes for joys/buttons, and the box to go under it, with the slot for Tmolding. Wiring and making pretty I can manage. If anyone might be interested please let me know what other information you would need to give me a quote. |
| SteveJ34:
Are you just needing the 6 pieces of wood cut (ie: Top, Bottom, Sides), holes drilled in the top, and the t-molding slot cut or do you want it assembled, painted/laminated and artwork attached? |
| Ginsu Victim:
You know, most of us that have no real skills still managed to make decent CPs. Just takes asking a few questions. We're here to help. :) |
| HaRuMaN:
--- Quote from: GinsuVictim on August 25, 2008, 02:18:13 pm ---You know, most of us that have no real skills still managed to make decent CPs. Just takes asking a few questions. We're here to help. :) --- End quote --- This is true. I can vouch that GinsuVictim has no real skills. ;) |
| wonkalow:
Oh believe me, I tried out of curiosity and it ended horribly and slightly painfully ;D --- Quote from: SteveJ34 on August 25, 2008, 02:11:11 pm ---Are you just needing the 6 pieces of wood cut (ie: Top, Bottom, Sides), holes drilled in the top, and the t-molding slot cut or do you want it assembled, painted/laminated and artwork attached? --- End quote --- painting, lamination and artwork I should be able to do (if not im sure I can research a bit and learn). Pretty much just wanting things cut and ready to assemble. Actually I was thinking assembled but I suppose I should be able to handle assembling it if you could provide minor instructions... since that would cut down on shipping by quite a bit. My biggest issue about doing it myself even if I could cut wood, is that theres a lot of things to factor (or so I think). Like slanting it downward a bit, proper spacing of buttons etc, Making the top removable, things like that... so I would prefer someone like you guys with experience with all of those things. I have a general idea of how wide id like it etc (but like I said, I have no experience so they may not even work) , I have it all written down at home, Ill get them when i get off and post them. Once I get the CP done Ill be eager and ready to go full speed. Right now I keep running into "well if the CP was done I could test this more fully and properly" and i get discouraged and take "breaks" for long periods of time. |
| Navigation |
| Message Index |
| Next page |