Author Topic: WTB:Corner molding for my cp, and barstools (Read 6757 times)

nullb0y · « **on:** August 24, 2008, 05:10:14 pm »

I need some rubber or plastic molding for the front edge of the cp
2 reasons
It needs to cover some screws holding the front plate on
and the rough edges on my cp
I Was looking at some stair noses but they want you to buy alot of them at once

something like this in plastic or rubber
I have a similar rough edge on my CP i need to screw some wood down and want to cover the screws

A couple barstools like you would find in an arcade (chrome and black material on top)

nullb0y · « **Reply #1 on:** August 28, 2008, 04:19:56 pm »

nullb0y · « **Reply #2 on:** August 30, 2008, 01:29:33 pm »

nullb0y · « **Reply #3 on:** September 03, 2008, 12:21:25 am »

keep it alive bump

DJ Infinity · « **Reply #4 on:** September 03, 2008, 12:44:22 am »

I have a barely used tornado spinner. Make me an offer.

alexred · « **Reply #5 on:** September 03, 2008, 09:02:18 am »

Joystick and panel latches shipped. Enjoy.

nullb0y · « **Reply #6 on:** September 03, 2008, 01:02:15 pm »

pm sent about the spinner

TheShanMan · « **Reply #7 on:** September 03, 2008, 07:46:39 pm »

So alexred set you up with a blue handle? I have half of a tron handle that's not broken - I'd have to see which side it is, but I'd be happy to sell it since I have no use for it.

Hoopz · « **Reply #8 on:** September 03, 2008, 08:06:25 pm »

You want t-molding? I have a few feet of red. Yours if you want it.

Encryptor · « **Reply #9 on:** September 03, 2008, 10:40:03 pm »

Quote from: TheShanMan on September 03, 2008, 07:46:39 pm

So alexred set you up with a blue handle? I have half of a tron handle that's not broken - I'd have to see which side it is, but I'd be happy to sell it since I have no use for it.

ShanMan - Could you check which half you half please. I need a right half and would buy yours if it's reasonable. LMK & Thanks.

Encryptor

nullb0y · « **Reply #10 on:** September 04, 2008, 12:37:25 am »

Ah, dont need t-molding
i need a 90* bend

I need the left half of the tron stick
He gave me the right half

Encryptor · « **Reply #11 on:** September 04, 2008, 05:36:17 am »

Quote from: nullb0y on September 04, 2008, 12:37:25 am

Ah, dont need t-molding
i need a 90* bend

I need the left half of the tron stick
He gave me the right half

See my last post above yours. I need the right half. Can we work a deal?

Encryptor

TheShanMan · « **Reply #12 on:** September 04, 2008, 09:20:44 am »

Encryptor, sorry I'd love to help you out but this is the left side.

Nullb0y, looks like you're in luck! It's yours if we can work out a deal. See picture. It has 3 "internal" cracks leading from the screw holes but even that big one doesn't seem to be threatening the integrity of it - the crack ends where the plastic bends inward at the bottom (you can easily see the whole crack from the picture). Otherwise it looks very nice to me. I don't have much of a feel for what it's worth, but I'm not looking to get rich off of it either. I'll try to make that determination and in the meantime you're welcome to make an offer if you wish.

nullb0y · « **Reply #13 on:** September 04, 2008, 10:12:07 am »

I dropped you a pm

Encryptor · « **Reply #14 on:** September 04, 2008, 09:05:36 pm »

Quote from: Encryptor on September 04, 2008, 05:36:17 am

Quote from: nullb0y on September 04, 2008, 12:37:25 am
Ah, dont need t-molding
i need a 90* bend

I need the left half of the tron stick
He gave me the right half

See my last post above yours. I need the right half. Can we work a deal?

Encryptor

nullb0y - Can we work a deal for the half you don't need? LMK

Encryptor

nullb0y · « **Reply #15 on:** September 04, 2008, 09:52:48 pm »

you mean the black left half? only if i get a blue left half lol

Encryptor · « **Reply #16 on:** September 05, 2008, 05:39:50 am »

I need a blue right half. I thought alexred sent you a blue right half that you didn't need. Was I mistaken and he sent you a black half?

Encryptor

nullb0y · « **Reply #17 on:** September 05, 2008, 06:33:09 am »

No, i bought a joystick with a black left half and a blue right half
I want a blue left half to match my blue right half
so the black left half would be the extra part if i get a new left

Encryptor · « **Reply #18 on:** September 05, 2008, 11:52:19 am »

Quote from: nullb0y on September 04, 2008, 12:37:25 am

Ah, dont need t-molding
i need a 90* bend

I need the left half of the tron stick
He gave me the right half

I'm missing something here. In the quote above you say you need the left half and he gave you the right half. Is that the one you are saying is black?

nullb0y · « **Reply #19 on:** September 05, 2008, 05:52:36 pm »

No no, i purchased a tron stick from him
the left half is black
the right half is the blue
Sorry, I am confusing some times

Encryptor · « **Reply #20 on:** September 05, 2008, 08:48:27 pm »

Oh ok. Now I understand. I think what was confusing was that in your first post you say you got a Tron joystick and a couple of posts down after that alexred says he shipped the joystick and panel latches. Then you say he shipped the wrong half.

I thought you already had the stick and he sent you a half but it was the wrong one. Thanks for clearing that up for me. If you come across anyone with a right half that's what I need. Thanks.

Encryptor

nullb0y · « **Reply #21 on:** September 06, 2008, 10:48:49 pm »

Quite allright, i tend to stumble with words more then not.

nullb0y · « **Reply #22 on:** September 09, 2008, 11:16:56 pm »

Bumping, i still am looking for everything The spinner got sold to someone else before he got pictures for me....

nullb0y · « **Reply #23 on:** September 13, 2008, 07:37:13 am »

got outbid on the ebay spinner...
Still looking for different ones....

Havok · « **Reply #24 on:** September 15, 2008, 01:56:14 pm »

Just get a TT2 spinner from GGG - best spinner you can buy. Plus, I got the Tron knob and it looks great!

nullb0y · « **Reply #25 on:** September 16, 2008, 06:59:56 am »

a what from where? lol

Havok · « **Reply #26 on:** September 16, 2008, 10:54:45 am »

Ha - lots of abbreviations there. For anyone that's wondering:

http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=86&products_id=268

nullb0y · « **Reply #27 on:** September 16, 2008, 08:38:15 pm »

how is the turbo twist 2?
ive got a couple arcanoid spinners heading my way right now

nullb0y · « **Reply #28 on:** September 17, 2008, 08:40:15 pm »

Awesome now i have my left half of my tron stick in blue as well

Encryptor · « **Reply #29 on:** September 18, 2008, 03:50:04 pm »

That's good to hear. I'm still looking for the right half.

Encryptor

nullb0y · « **Reply #30 on:** September 18, 2008, 05:43:37 pm »

if you decide you want to go black left half let me know lol

nullb0y · « **Reply #31 on:** September 21, 2008, 05:48:10 pm »

bumpy, bump bump

nullb0y · « **Reply #32 on:** September 23, 2008, 10:48:38 pm »

bump?

nullb0y · « **Reply #33 on:** September 25, 2008, 09:01:24 pm »

bump?

???bump?

delta88 · « **Reply #34 on:** September 27, 2008, 09:31:26 am »

Its dead. Let it RIP

nullb0y · « **Reply #35 on:** September 27, 2008, 03:51:38 pm »

Gee, thanks ed
I guess ill take that as a helpful bump

nullb0y · « **Reply #36 on:** October 01, 2008, 07:27:20 am »

still looking for corner molding and barstools

nullb0y · « **Reply #37 on:** October 05, 2008, 08:24:53 am »

revive!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: ****WTB:Corner molding for my cp, and barstools**** (Read 6757 times)

Author Topic: WTB:Corner molding for my cp, and barstools (Read 6757 times)