| Main > Main Forum |
| Wiring pc power switch? |
| << < (2/2) |
| DaOld Man:
You want to wire them to the COMMON and NO contacts of the button. Just wanted to point that out so you dont wire it to the GROUND that goes back to your keyboard emulator. (Keywiz,etc). The button that turns on your PC needs to be separate from your other buttons, electrically. Heres one way to do it. |
| cadmium:
--- Quote from: DaOld Man on August 23, 2008, 08:27:05 am ---You want to wire them to the COMMON and NO contacts of the button. Just wanted to point that out so you dont wire it to the GROUND that goes back to your keyboard emulator. (Keywiz,etc). The button that turns on your PC needs to be separate from your other buttons, electrically. Heres one way to do it. --- End quote --- Thanks for the warning, I got that one covered though. I finally got around to trying it. I ripped the header wire off a junked computer and soldered about 6' of hookup wire too it, so I can put it anywhere in my cab. Right now, it's hanging out the coin door, but that's only temporary. :cheers: |
| Thenasty:
--- Quote from: MrMojoZ on August 22, 2008, 02:55:47 pm ---Consider this, as a tech I generally turned MBs on with the tip of a screwdriver. ;) --- End quote --- If such tool is not around, I use my ring....... |
| Navigation |
| Message Index |
| Previous page |