Arcade Collecting > Restorations & repair
DK2 Restoration? err... Project? - This machine has been Sold!
RetroACTIVE:
--- Quote from: CheffoJeffo on March 14, 2009, 09:36:31 am ---You know, you should really write this up for GameRoom Magazine -- people want to read about cool restos and this certainly qualifies.
:cheers:
--- End quote ---
Hey man thanks for the compliment!... I would love to do a write up, it would be really really neat!
:cheers:
--- Quote from: WunderCade on March 14, 2009, 03:28:08 pm ---It's a shame to waste NOS blue buttons on a D2K, I can't think of a better candidate for the aftermarket buttons. Save the NOS one's for your authentic Kongs.
My 2 cents.
--- End quote ---
I hear ya but I think maybe "waste" is a bit harsh... I mean if it were a x-in-1 or some other conversion... I'd agree with you. Besides those two NOS buttons will see very little action... so they will be well cared for in my warm home... ;)
CheffoJeffo:
--- Quote from: RetroACTIVE on March 15, 2009, 12:41:35 pm ---
--- Quote from: CheffoJeffo on March 14, 2009, 09:36:31 am ---You know, you should really write this up for GameRoom Magazine -- people want to read about cool restos and this certainly qualifies.
:cheers:
--- End quote ---
Hey man thanks for the compliment!... I would love to do a write up, it would be really really neat!
:cheers:
--- End quote ---
Well, then, since I don't need you to fix my stupid Joust sound board ... ;)
Level42:
Being anal:
Is it me or is that jump button unusually high up ? (Compare it to the P1/P2 buttons).
RetroACTIVE:
--- Quote from: Level42 on March 16, 2009, 07:38:28 am ---Being anal:
Is it me or is that jump button unusually high up ? (Compare it to the P1/P2 buttons).
--- End quote ---
You are correct sir! I had 2 orange buttons to choose from, one had bad coloring and that one, which the retainer clip slot was a bit off, causing the difference in height you see.
I opted for the cleaner colored one ;)
rockin_rick:
If it bothers you, you could shim the button down a tad. A thin washer would work but may be slightly 'rattlely' or an o-ring would do the same without the rattle.
Rick
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version