Main > Project Announcements

Finally progression has started :)

(1/3) > >>

Paulson:
 It's announced as from now...

 

 

Franco B:
Why wait and put all your separate posts in the main forum when you could put them all in one PA thread where we can see the progress ;)

Paulson:

 Still waiting for tools... :angry:

Franco B:
 :tool:  :tool:  :tool:

Yes I know Im helpful, your welcome  :laugh:

No sign of your jigsaw then?

Paulson:
 Finally I have being able to make a start...there is a slight change of plans
 to the original design. I will be making a standard 2 player vertical cocktail
 cab with either a 48-1 or a 60-1 jamma board installed. I will probably
 do the 3 sided on another date...we will see how this one pans out.

 Anyways I started on the base & cut out a 120mm hole with my jigsaw...this with be for
 my multicolour fan I bought off Ebay for 1p.
  It was far easier than I thought to be honest...& I cut just inside the line
 for a perfect fit when sanded.

 

 Next I cut out the base vents...this was a bit more tricky & time consuming
 as they are plywood opposed to 3/4 MDF.

 

 They are a bit wragged at the moment but I mocked up the positions on
 the up-turned base.

 

 Now for some sanding...more to come later...

 P (UK)

Navigation

[0] Message Index

[#] Next page