Main > Main Forum
Electric shock in my Mame system
shilmover:
Okay...
This is a strange one.
Installed a new monitor (its a PC monitor so it has the regular power). If i touch any metal part in the cab (USB connector, VGA Connector, Power Supply metal case, etc), I get an electric shock. I have not measured it, but its enough to wake you up (not hurt you).
I get this even if the Powerbar is turned off. I believe it is coming from the Monitor.
It is my assumption that something is not grounded properly.
Any ideas? I would hate for one of my kids to get zapped. :'(
Thanks,
B
grantspain:
probably a half mains shock,all your metal parts are earthed?
shilmover:
I thought so, but I guess not.
how would I do that properly?
--- Quote from: grantspain on August 10, 2008, 08:44:36 am ---probably a half mains shock,all your metal parts are earthed?
--- End quote ---
grantspain:
every exposed metal area(coin door,control panel) should all be linked to earth,as should the monitor frame
basically all you need to do is connect a wire to each metal part and have a common earthing point where they all connect to which is in turn linked to the earth of the power cable
shilmover:
I will try that.
The monitor has a normal 3-prong computer power cable (since its just a de-cased monitor), so it is not connected, but I assume it is via the cable.
B