Main > Main Forum

Control Panel in 3d Max...

Pages: (1/5) > >>

Paulson:

 Well here we are again...I suppose it's always best to plan
 ahead & cut out any despair later on.

 

 

 

 This is for my longer panel at the front of my cab...it's going to be
 based on the Williams Multi game panel.

Lilwolf:

I always recommend two things

1) always use quick disconnect and stranded wire.  This way you can take it apart without rewiring.

2) buy some crap particle board and try it out first.  See if you like it.  Or heck, cardboard will do.  Make sure that your hands fit ect.  I redid a few control panels of mine 3 - 4 times before I liked them.

Looks good, if you can handle the lack of 6 buttons when you play sf3a.  But some people only do super upper cuts anyway :)

Paulson:


 Thanks for the tip...err...what is Sf3a? I guess some kind of fighter?
 This panel will be for the horizontal games only & I won't be installing
 every game cause' most of em' are crap. The other part will be head to head
 vertical config with 2 buttons each.

Ginsu Victim:

I don't get it. Explain why your control panel is setup the way it is.

Paulson:


--- Quote from: GinsuVictim on August 06, 2008, 09:59:03 am ---I don't get it. Explain why your control panel is setup the way it is.

--- End quote ---

 Before I joined these boards a few weeks ago I had seen 3 way cocktail config...
 so I thought it would be really cool to have a Williams Multi Game panel
 along the front. Like this one made by Spacies.

 I'm no way ripping him off...he just happened to have the same idea. :)
 My cab will look something like the one shown below.

 

Pages: (1/5) > >>

Go to full version