| Main > Main Forum |
| flipper buttons without springs? |
| << < (3/4) > >> |
| Ginsu Victim:
It has an e-clip on bottom. Pop that off and the plunger will come out. Just remove the spring and reassemble. |
| Broken:
--- Quote from: GinsuVictim on July 28, 2008, 04:33:24 pm ---It has an e-clip on bottom. Pop that off and the plunger will come out. Just remove the spring and reassemble. --- End quote --- my leafs dont have e-clips. havent seen a leaf with an e-clip before. |
| Ginsu Victim:
Mine do. |
| Broken:
is it even possible to remove a spring on a leaf switch without an e-clip. |
| RandyT:
--- Quote from: Broken on July 28, 2008, 11:15:29 pm ---is it even possible to remove a spring on a leaf switch without an e-clip. --- End quote --- I'm only familiar with the old school type that had the clips. What do these use to keep the plunger from flying out of the bezel? Is a photo or at least a description of the mechanism possible? If it looks like squished plastic or a glued on part, then they are most likely sealed so the spring couldn't be removed without ruining them. RandyT |
| Navigation |
| Message Index |
| Next page |
| Previous page |