| Main > Main Forum |
| Spy Hunter on a Standard CP? |
| << < (14/15) > >> |
| Flake:
--- Quote from: Neverending Project on October 21, 2008, 04:33:01 pm ---I'll post this here instead of starting a new thread, as it seems to fit. I am trying to configure my Logitech Steering Wheel for Spy Hunter in MAME (v127u6) and I can't get the throttle set correctly. I have set the Digital Inc and Dec to None for both Paddle and Throttle. In the Analog Paddle setting, I selected it, turned the wheel, and it was subsequently set to Joystick 1 X axis. This works correctly. But on the pedals connected to my steering wheel, the brake pedal is the -Y axis, and the gas pedal is the +Y axis. To explain: if you were looking at the joystick movement, stepping on the brake pedal has the range from center to the BOTTOM of the screen, and stepping on the gas pedal has the range from center to the TOP of the screen. OK, so I select the Analog Throttle in MAME, step on the gas pedal, and it registers Joystick 1 Y axis. But in a game, stepping on the gas pedal will stop the car, and foot OFF the gas pedal will be full acceleration. What am I missing here? --- End quote --- hmm...wish I could help you out here. I dont remember doing much to get mine setup other than adjusting the analog settings on the .ini file. I certainly dont remember "mapping" the pedals but i could be wrong. Did you have to change a setting in your .ini file? Like change analog from 0 to 1 maybe? I doubt this is your problem, I'm pretty lame when it comes to activating controllers and adjusting the .ini file. Hopefully URebelScum will hear your call for help and pipe in with some advice..... |
| ahofle:
--- Quote from: Neverending Project on October 21, 2008, 04:33:01 pm ---OK, so I select the Analog Throttle in MAME, step on the gas pedal, and it registers Joystick 1 Y axis. But in a game, stepping on the gas pedal will stop the car, and foot OFF the gas pedal will be full acceleration. What am I missing here? --- End quote --- Have you tried reversing the Y axis in MAME? I seem to recall something similar but I can't remember what I did. Now that I think of it, maybe I have been just using the brake pedal for acceleration in Spy Hunter. |
| Neverending Project:
--- Quote from: ahofle on October 21, 2008, 04:55:35 pm ---Have you tried reversing the Y axis in MAME? --- End quote --- How do you do this? And would it apply to every game, or just Spy Hunter? |
| TheShanMan:
I don't have a good answer for you, other than it worked out of the box with my wheel. Pedals work the same as you describe. I wonder if you just have a messed up cfg file. Perhaps try deleting and start over, seeing if it plays without any input modifications (you'll probably need to modify buttons though). |
| ahofle:
--- Quote from: Neverending Project on October 21, 2008, 05:01:10 pm --- --- Quote from: ahofle on October 21, 2008, 04:55:35 pm ---Have you tried reversing the Y axis in MAME? --- End quote --- How do you do this? And would it apply to every game, or just Spy Hunter? --- End quote --- Press tab in game, and select 'analog controls'. |
| Navigation |
| Message Index |
| Next page |
| Previous page |